EN109-1665751-44
13 Technical specifications
Power supply: 220-240 V
Frequency: 50/60 Hz
Max. power output: 2100 VA
Permitted voltage deviation: 10%
Drive: DC-motor, 3.5 Hp
Motor power: 2600 W
Max. current consumption: 10 A
Fuses: 2 x T10H250V
Min. – max. speed: 0.4 – 18 km/h (in increments of 0.1 km/h)
Max. speed in Autospeed mode: adjustable up to 18 km/h
Positive angle of inclination: 0% to +15% (in increments of 0.5%)
Negative angle of inclination: 0% to -10% (in increments of 0.5%)
Other training parameters
Time: 1 – 1440 min (in increments of 1 minute)
Distance: 0.1 – 100 km (in increments of 0.1 km = 100 m)
Energy 1 – 10,000 kcal (in increments of 1 kcal)
Heart rate: 60 to 220 bpm (beats per minute; in increments of 1 bpm)
Readout: current heart rate readout
Heart rate detection: Sigma transmitter and receiver (built-in receiver)
Dimensions: 212 x 86 x 148 cm (L x W x H); height includes console
Effective running surface: 150 x 50 cm
Height of fixed side supports: 76 cm (distance from running surface to bottom of side supports)
93.5 cm (distance from running surface to top of side supports)
Height of adjustable side supports: min. 61 cm (distance measured from running surface to bottom of
(‘Plus’ model): side supports)
max. 108.5 cm (distance measured from running surface to top of
side supports)
Range: 30 cm (electrically adjustable)
Step-up height: 12.5 cm (‘Standard’ and ‘Plus’ models)
Treadmill weight: 140 kg (‘Standard’ model), 155 kg (‘Plus’ model)
Max. permissible weight
on running surface: 235 kg (see figure below)
Display: LCD/TFT colour display (with backlight)
Training profiles (fixed programmes): 14
Training profiles (user-defined): 30
Guarantee: 2 years (except parts which are subject to wear, such as the
rollers, running surface, platform under running surface etc.)
To Next Page
Loading...