EN109-1665751-44
Comment: this test can also be performed without Autospeed. To do so, you must set the test speed
manually using the central rotary knob. Do this before pressing OK.
.
During the test, the most important
parameters will be displayed:
• time (remaining until the goal is reached)
• distance covered
• current heart rate (if a heart-rate belt is
worn)
• speed
After the test has ended, a screen which
gives the user an indication of his or her
fitness level will appear.
It is possible to distinguish between the
following levels:
- - poor
- moderate
-/+ reasonable/average
+ good
++ very good
For a detailed overview of the test results,
you must press OK.
After the test has ended, the Results screen
will appear.
Note the results and record them on the
results form (see appendix) so that they can
be added to the patient record at a later date.
Allow the person taking the test to cool down
and stretch.
Press OK to return to the Main menu.
Comment: pressing the STOP button will
bring the test to a premature end and the
screen shown on the left will be displayed
instead of the Results screen.
Press OK to return to the Main menu.
To Next Page
Loading...
Need help?
General