Enterasys S8-Chassis-POE4 - Appendix A: Specifications and Regulatory Compliance; S8 Chassis Specifications

Enterasys S-Series S8 Chassis Hardware Installation Guide A-1
A
Specifications and Regulatory Compliance
Thisappendixprovidesoperatingspecificat ionsfortheS8chassis.EnterasysNetworksreserves
therighttochangethespecificationsatanytimewithoutnotice.
ForMTBFinforma tion,refertothefollowingEnterasysNetworkssupportWebsite:
http://www.enterasys.com/support/mtbf
S8 Chassis Specifications
Table A-1 S8 Chassis Specifications
Item Specification
S8-Chassis
Dimensions 63.96 cm x 44.70 cm x 47.32 cm (25.19” x 17.60” x 18.63”)
Weight 36.06 kg (79.5 lbs)
S8-Chassis-POE4
Dimensions 72.87 cm x 44.70 cm x 47.32 cm (28.69” x 17.60” x 18.63”)
Weight 49.37 kg (106.85 lbs)
S8-Chassis-POE8
Dimensions 77.31 cm x 44.70 cm x 47.32 cm (30.44” x 17.60” x 18.63”)
Weight 53.75 (118.5 lbs)
Environmental Requirements
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity 5% to 90% (non-condensing)