Need help?Do you have a question about the Enterasys S Series and is the answer not in the manual?
General| Series | S Series |
|---|---|
| Category | Chassis |
| Form Factor | Modular |
| Power Supply | Redundant |
| Management | CLI, Web, SNMP |
| Port Density | Varies by model and modules |
| Forwarding Capacity | Varies by model |
| Switching Capacity | Varies by model |
Overview of the Enterasys S-Series Stand Alone (SSA) switch models covered in this guide.
Crucial safety notice stressing that only qualified personnel should perform installation or service operations.
Essential safety guidelines for Class 1 laser transceivers, emphasizing eye protection from laser output.
Specific safety warnings related to handling fiber optic ports and transceivers to prevent eye hazards.
Defines the license grant, restrictions on modification, copying, and distribution of the firmware.
Specifies the warranty disclaimers and limitations of Enterasys Networks' liability for product use.
Details how to contact Enterasys Networks for support via web, phone, and email.
Critical safety warnings for installation, including electrical hazards and contact avoidance.
Instructions for mounting the SSA switch, covering rack and flat surface installation options.
Instructions and warnings for securely mounting the SSA switch into an equipment rack.
Step-by-step instructions for inserting power supply modules into the SSA switch chassis.
Procedures for connecting the SSA switch to power sources and initiating the startup sequence.
Procedures for connecting the SSA switch to the network using various cable types and transceivers.
Instructions for inserting SFP and SFP+ pluggable transceivers into the switch ports.
Final steps for setup, including initial login via console port and default user accounts.
Explains the function and status indications of Port, System, and Power Supply LEDs.
Details the status of RJ45, SFP, and SFP+ port LEDs (RX/TX) and suggests troubleshooting steps.
Describes the status of System LEDs (FAN, CPU, PWR) and provides troubleshooting guidance.
A checklist of common problems, causes, and solutions for SSA switch operational issues.
Step-by-step instructions for identifying and replacing a faulty fan module in the SSA switch.
Procedures for safely removing a power supply unit from the SSA switch, with precautions for single supply operation.
Explains the recommended and last resort procedures for shutting down or resetting the SSA switch.
Detailed steps for installing the SSA switch in a 4-post rack using the optional rack mount kit.
Detailed steps for installing the SSA switch in a 2-post rack using the optional rack mount kit.
Step-by-step guide for securely attaching the SSA chassis to a wall using the mounting bracket.
To Next Page
