Enterasys S Series User Manual

Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide C-1
C
Optional Rack Mount Rail Kit
Installation
This appendix describes the installation and use of the optional SSA Universal Rack Mount Kit,
model number SSA-FB-MOUNTKIT. This optional rack mounting kit provides for flexible
mounting options in both 4-post and 2-post rack installations.
Required Tools
• ESD wrist strap (included with the S-Series chassis)
• Phillips screwdriver
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Risques d'électrocution:Seul un personnel qualifié doit effectuer les procédures d'installation.
For information about... Refer to page...
Required Tools C-1
Contents of Mounting Kit C-2
Installation Site Requirements C-2
Required Order of Installation C-3
Removing the Rack Mount Ears from the SSA Switch C-3
Installing the Adapter Plates C-3
4-Post Rack Mount Installation C-5
2-Post Rack Mount Installation C-8

Enterasys S Series Specifications

General

Brand	Enterasys
Model	S Series
Category	Chassis
Language	English