Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide A-1
A
Specifications
This appendix provides the following information:
Enterasys Networks reserves the right to change specifications at any time without notice.
SSA Switch Specifications
Table A-1 describes I/O ports for the SSA switch.
Table A-2 describes physical, electrical, and environmental specifications for the SSA switch.
For information about... Refer to page...
SSA Switch Specifications A-1
Pluggable Transceiver Specifications A-2
COM Port Pinout Assignments A-2
Regulatory Compliance A-3
Table A-1 SSA Switch Ports
Item Port Description
SSA-T8028-0652 Ports
Ports 1 through 48 forty-eight 10/100/1000BASE-T RJ45 ports
Uplink Ports 1 through 4 four 10Gb SFP+ ports
SSA-G8018-0652 Ports
Ports 1 through 48 forty-eight 1000BASE-X SFP ports
Uplink Ports 1 through 4 four 10Gb SFP+ ports
Table A-2 Specifications
Item Specification
Physical (SSA Chassis)
Dimensions 4.37 cm H x 44.73cm W x 57.30 cm D
1.72” H x 17.61” W x 22.55” D
Approximate Weight Gross: 14.6 kg (32.2 lb)
Mean Time Between Failure (MTBF) Refer to the MTBF web site at URL
http://www.enterasys.com/support/mtbf/
To Next Page
Loading...