Epec 6107 - Page 22

Technical Manual &
Cabling Instructions
Page 22 / MAN000596
DI
Epec Oy reserves all rights for improvements without prior notice
Epec Oy
Tiedekatu 6
FIN-60320 Seinäjoki
Postal address
PL/P.O.Box 194
FIN-60101 Seinäjoki,
Finland
Phone
+358-(0)20-7608 111
Fax
+358-(0)20-7608 110
Internet
www.epec.fi
9 DI
• This type of pin is a ground referenced input (DI)
• This type of pin has no configurable features
Electrical characteristics
Symbol
Parameter
Conditions
Min
Max
Units
R
I
Input Resistance Referenced to GND typ. 44 kΩ
V
IH
Input High Voltage
level
(Note 1, 3) 4,2 36 V
V
IL
Input Low Voltage level (Note 3) 0 3,4 V
V
I-max
Max Input voltage (Note 2) -0,5 43 V
C
I
Input pin capacitance typ. 1 nF
Note 1: Exceeding the max values might cause damage to input.
Note 2: Overload conditions.
Note 3: Includes hysteresis. The input state is maintained until the second voltage limit is
exceeded