Epec 6107 - Glossary

Technical Manual &
Cabling Instructions
Page 78 / MAN000596
Glossary
Epec Oy reserves all rights for improvements without prior notice
Epec Oy
Tiedekatu 6
FIN-60320 Seinäjoki
Postal address
PL/P.O.Box 194
FIN-60101 Seinäjoki,
Finland
Phone
+358-(0)20-7608 111
Fax
+358-(0)20-7608 110
Internet
www.epec.fi
16 GLOSSARY
A
API: Application Programming Interface
B
Boot loader: Boot loader is a software that is needed to load and run the device system. Epec
boot loader cannot be updated by the customer.
C
CAN: Controller Area Network
CANopen: Communication protocol and device profile specification for embedded systems
used in automation by CAN in automation (CiA) http://www.can-cia.org/
CODESYS: Controller Development System
CPU: Central Processing Unit
E
ECC: Error-correcting code memory
F
Firmware: Firmware is the device software programmed into memory contained in the
hardware. Epec firmware can be updated by the customer, Epec firmware does not
include boot loader.
G
GFG: Glass-Film-Glass. A touchscreen panel with a robust glass surface designed for harsh
environmental conditions.
GPS: Global Positioning System
H
HMI: Human Machine Interface
I
IP class: Ingress Protection Rating, protection class. Classifies the degree of protection
provided against the intrusion dust, water etc in mechanical casings and with electrical
enclosures. It is published by the International Electrotechnical Commission (IEC).
J
J1939: SAE J1939 protocol Vehicle bus standard used for communication and diagnostics