Technical Manual &
Cabling Instructions
Page 7 / MAN000596
Preface
Epec Oy reserves all rights for improvements without prior notice
Epec Oy
Tiedekatu 6
FIN-60320 Seinäjoki
Postal address
PL/P.O.Box 194
FIN-60101 Seinäjoki,
Finland
Phone
+358-(0)20-7608 111
Fax
+358-(0)20-7608 110
Internet
www.epec.fi
3.5 Limited Liability
The manufacturer shall under no circumstances be liable for loss of production, loss of profit,
loss of use or any other consequential damages and/or indirect losses, whatever their cause
may be. In case claims based on product liability are brought against the Manufacturer for which
claims the manufacturer may be liable, the manufacturer’s liability is limited to the extent
normally covered under normal product liability insurances.
The buyer shall compensate the manufacturer to the extent that the manufacturer might be
liable to pay damages as a result of claims based on product liability according to paragraph
above.
3.6 Environmental Statement
The manufacturer uses ISO 14001: 2015 environmental certified processes and materials to
manufacture products. The manufacturer undertakes to arrange for the recycling and scrapping
of the products that are returned to the manufacturer by the buyer and/or the products that are
received by the Manufacturer in connection with maintenance services performed as a result of
that repairing of the products is deemed by the Manufacturer to be inappropriate.
The manufacturer will charge a scrapping fee from the buyer according to the manufacturer's
price list in force from time to time. No scrapping fee will, however, be charged for products that
are received by the manufacturer during the warranty period.
WEEE
This product complies with the European Community Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) encouraging and setting specific criteria for the collection,
handling and recycling of electric and electronic waste.
This product includes a lithium battery soldered on the PCB's bottom side (placed
on the upper right part of the PCB). When recycling the product, make sure that
the battery is removed from the PCB and recycled separately.
To Next Page
Loading...