Epec 6107 - Environmental Tests

Technical Manual &
Cabling Instructions
Page 49 / MAN000596
Approvals and Safety
Epec Oy reserves all rights for improvements without prior notice
Epec Oy
Tiedekatu 6
FIN-60320 Seinäjoki
Postal address
PL/P.O.Box 194
FIN-60101 Seinäjoki,
Finland
Phone
+358-(0)20-7608 111
Fax
+358-(0)20-7608 110
Internet
www.epec.fi
14.3 Environmental Tests
The following environmental tests have been performed to Epec 6100 and 6107 units (without
2G/3G/GPS or WLAN options):
Temperature
Test
Temperature
Duration/
Exposure time
Remarks
Cold
IEC 60068-2-1 (2007-
03),Test Ad
-25 °C 16 h
• 1 °C/min
Dry heat
IEC 60068-2-2 (2007-
07),Test Bb
+70 °C 16 h
• 1 °C/min
Damp heat cycling
IEC 60068-2-30 (2005-
08),Test Db
+25 °C/+55 °C
• rel. humidity >90 %
• cycle duration 24 h
• six test cycles
Change of temperature
IEC 60068-2-14 (2009-
01)
Test Na
-30 °C/+60 °C 3 h
• change time between
extreme temperatures
1-2 min
•
5 test cycles
Change of temperature
IEC 60068-2-14 (2009-
01), Test Nb
-40 °C/+70 °C 3 h
• change of temperature
10 °C/min
• 2 test cycles
Mechanical resistance
Test
Duration and direction
Remark
Shock test IEC 60068-2-
27 (2008-02) Test Ea
• pulse duration 6 ms
• 500 impulses in six
directions
• half sine pulse shape
• peak acceleration 500 m/s
2
Vibration, random
IEC 60068-2-64 (2008-
04),Test Fh
•
test duration 60 min in
every three test
direction
• ASD-level 5 m
2
/s
3
, 10 … 200
Hz
• ASD-level 1,0 m
2
/s
3
, 200 …
500 Hz
• total spectral acceleration
3,54 grms
Corrosion
Test
Temperature
Duration
Concentration
Salt spray test
ISO 9227
+35 °C 24 h 5 % NaCl