EPSON Stylus PHOTO 2100/2200 Revision B
ADJUSTMENT Adjustment Items and Overview 190
Main adjustment items
Cutting position
adjustment
This adjustment is made to correct the cutting
position accuracy of the roll paper when the Auto
cutter is fitted.
Print the print patterns from the adjustment program and cut the print
patterns with the Auto cutter. Select the pattern number where the cutting
position in the pattern is the nearest to the color boundary position of the
pattern, and enter it from the program. The correction value is saved into
the EEPROM.
Exclusive servicing
program
Roll Paper
USB ID input This adjustment is made to allow the PC to
recognize the connected printers individually when
multiple printers of the same model are connected
and used with the PC via a USB hub.
Select this function in the exclusive servicing program and enter the serial
numbers of the printers. The correction value is saved to the specific
EEPROM address on the Main board.
Exclusive servicing
program
Non-target
IEEE1394 ID input This adjustment is made to provide the product
with the unique ID for identification of this printer
in the IEEE1394 connection environment.
Since the unique codes of 4.5 million units have been assigned to the
EPSON Stylus PHOTO 2100/2200 as the IEEE1394 ID, unique codes
cannot be generated randomly. The correction value is saved to the
specific EEPROM address on the Main board.
Exclusive servicing
program
Non-target
Left/right margin This adjustment is made to correct the printout
position in the CR main scanning direction.
Select/execute this function in the exclusive servicing program. Enter the
correction value in the program using the rule position of the print pattern
as a reference.
The correction value is saved to the specific EEPROM address on the
Main board.
Exclusive servicing
program
Plain paper
Table 5-1. Servicing Adjustment Items
Function Item Purpose Method Outline Tool
Used
Media
To Next Page
Loading...
