Epson 2200 - Stylus Photo Color Inkjet Printer - Indicator Display in Normal Mode

EPSON Stylus PHOTO 2100/2200 Revision B
PRODUCTION DESCRIPTION Functions 35
1.3.12 Indicator Display in Normal Mode
! "-" indicates no change.
! Blink : Repetition of On 0.5 sec + Off 0.5 sec
! Blink 2 : Repetition of On 0.2 sec + Off 0.2 sec + On 0.2 sec +
Off 0.4 sec
! High speed blink : Repetition of On 0.1 sec + Off 0.1 sec
! Blink alternately 1 : Same as blink
! Blink alternately 2 : Repetition of Off 0.5 sec + On 0.5 sec
! Special blink : TBD
Table 1-13. Printer Condition and LED Status
Printer status
Indicators
Power Paper Ink 1 - 7 priority
Power on condition On - - 18
Data processing Blink - - 17
Ink sequence Blink - Special blink
*a
*a : Indicated by all Ink LEDs.
16
Ink cartridge change mode Blink - - 15
Ink level low - - Blink
*b
*b : The Ink LEDs corresponding to the cartridge lines A, B, C, D, E, F, G turn
on or blink individually. When viewed from the printer front, the places of
inserting the ink cartridges are lines A, B, C, D, E, F, G from left to right
and correspond to LED1, LED2, LED3, LED4, LED5, LED6, and LED7.
14
Paper out - On - 13
Ink end - - On
*b
12
Ink color error - -
High speed
blink
*b
11
Ink combination error - -
High speed
blink
*b
10
No ink cartridge or
Ink cartridge error
- - On
*b
9
Double feed error - On - 8
Paper jam condition - Blink - 7
Paper gap error - On - 6
Cutter jam error - Blink2 - 5
Release lever position error -
High speed
blink
-4
Cutter position error Off Blink2 Blink2 3
Maintenance request Off
Blink
alternately 1
Blink
alternately 2
2
Main board RAM Error On Slow blink Slow blink Slow blink
Fatal error Off
High speed
blink
High speed
blink
1