Epson 2200 - Stylus Photo Color Inkjet Printer - 5.1.3 Replacement Part-Based Adjustment Priorities

EPSON Stylus PHOTO 2100/2200 Revision B
ADJUSTMENT Adjustment Items and Overview 194
5.1.3 Replacement Part-Based Adjustment Priorities
The following table indicates the adjustment items and priorities on a replacement part basis.
Table 5-5. Replacement Part-Based Adjustment Item and Priority List 1
Adjustment Item Head Replacement Head Removal
Main Board
Replacement
(*a)
Main Board
Replacement
(*b)
PSB/PSE
Board
Replacement
Waste Ink Pad
Replacement
PW Sensor
Replacement/
Removal
CSIC Board
Replacement/
Removal
Main board data read/write
11
Initial value write
   2    
PG adjustment
1 (Recommended) 1 (Recommended) 11
CR tooth skip prevention
mechanism adjustment
      2 2
USB ID input
3 
IEEE-1394 ID input
   3    
Waste ink counter reset
1 
Initial charge sequence
2       
Powerful CL

(Executed as required)
2 33
Head ID input
3   4    
Head angular adjustment
4344
Bi-D adjustment
5 4  5   5 5
Pixel shift adjustment
65 6 
PF adjustment
   7    
PW sensor adjustment
8 6 
CR motor drive torque
dispersion measurement
   9 1   
A3+ pattern printing
762102276
PG adjustment jigs
1111
Loop scale application jig
       
CR tooth skip prevention
mechanism adjustment gauge
22