EPSON Stylus PHOTO 2100/2200 Revision B
ADJUSTMENT Adjustment Items and Overview 195
*a: When data can be read from the old board
*b: When data cannot be read from the old board. Also replace the Waste ink pads.
*c: Since the ASP mechanism is submitted to print inspection and cleaning in the processes and is then packed after removal of the Board unit, Head, ASF, Waste ink pads,
Housing and like, the adjustment items marked (*c) have already been executed but are executed as extra precautions.
*d: Basically, peel the IEEE-1394 label applied to the old ASP mechanism and apply it to the specified position of the new mechanism.
Table 5-6. Replacement Part-Based Adjustment Item and Priority List 2
Adjustment Item
CR Motor
Replacement
PF Motor
Replacement
ASF/Pump
Motor
Replacement
PF Encoder
Sensor
Replacement
CR Unit
Removal
PF Roller
Replacement
Paper Eject
Roller A
Removal
ASP Mechanism
Unit
ASF Unit
Main board data read/write
Initial value write
PG adjustment
11 1 1
(*c)
CR tooth skip prevention
mechanism adjustment
1 2 2 2 2
(*c)
USB ID input
IEEE-1394 ID input
(*d)
Waste ink counter reset
Initial charge sequence
Powerful CL
33 3 3
Head ID input
Head angular adjustment
44 4 4
Bi-D adjustment
5 5 5 5
Pixel shift adjustment
6
PF adjustment
1 6 6 7
PW sensor adjustment
77 7 8 1
CR motor drive torque dispersion
measurement
2 9
A3+ pattern printing
3 211888 10 2
PG adjustment jigs
11 1 1
Loop scale application jig
When applying
Loop scale
When mounting
Spur gear A
CR tooth skip prevention
mechanism adjustment gauge
1 22 2 2
To Next Page
Loading...
