Epson 2200 - Stylus Photo Color Inkjet Printer - Page 218

EPSON Stylus PHOTO 2100/2200 Revision B
MAINTENANCE Overview 218
3
! <Lubrication Point>
Driven pulley
! <Lubrication Type>
G-26
! <Lubrication Amount>
φ1mm x 1mm x 3 points
Refer to Figure 6-5.
4
! <Lubrication Point>
Inside diameter of combination gear 12, 22.4
! <Lubrication Type>
O-12
! <Lubrication Amount>
Entire periphery of inside diameter
Use a dispenser to apply it.
Refer to Figure 6-6.
5
! <Lubrication Point>
Inside diameter of combination gear 14, 28
! <Lubrication Type>
O-12
! <Lubrication Amount>
Entire periphery of inside diameter
Use a dispenser to apply it.
Refer to Figure 6-6.
6
! <Lubrication Point>
25.6 side tooth surfaces of Combination gear
17.19, 25.6
! <Lubrication Type>
G-26
! <Lubrication Amount>
φ0.5mm x 10mm (4 surfaces)
Refer to Figure 6-6.
7
! <Lubrication Point>
ASF motor mounting plate B shaft
! <Lubrication Type>
G-26
! <Lubrication Amount>
φ1mm x 4mm
Use a brush to apply it.
When mounting the
Combination gear 17.19,
25.6, be careful not to
spread oil toward the motor.
Refer to Figure 6-6.
Table 6-2. Lubrication Points
Ref.
No.
Lubrication Type/Point Remarks
8
! <Lubrication Point>
Felts D3.6 of Combination gears 12, 22.4 and 14,
28
! <Lubrication Type>
O-12
! <Lubrication Amount>
Immerse them in 0-12.
Wipe them so that excess
oil will not go into the
motor.
Refer to Figure 6-6.
9
! <Lubrication Point>
Paper eject rollers A, B and EJ grounding spring
engagement
! <Lubrication Type>
G-26
! <Lubrication Amount>
φ1mm x 52mm
Refer to Figure 6-7.
10
! <Lubrication Point>
Paper guide rear and PF roller engagement
! <Lubrication Type>
G-26
! <Lubrication Amount>
φ0.5mm x 5 +/- 2mm
! Using the spur gear
tool, apply grease
while rotating the Spur
gear 76.
! Avoid applying grease
to the specially coated
surface of the PF
roller.
Refer to Figure 6-8.
! <Lubrication Point>
PF roller and PF grounding spring
! <Lubrication Type>
G-26
! <Lubrication Amount>
φ1mm x entire PF roller periphery
! Using the spur gear
tool, apply grease
while rotating the Spur
gear 76.
Refer to Figure 6-8.
Table 6-2. Lubrication Points
Ref.
No.
Lubrication Type/Point Remarks