EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Error Indications and Fault Occurrence Causes 74
Ink Color Error - - High speed Blink This error is detected if Ink end/low occurs during
printing and the new Ink cartridge inserted for ink change
differs in color/type from the old Ink cartridge.
Ink Level Low Error - - Blink
CAUTION: If the EPW3 shows the error,
printing can be continued until the
printer is placed in the ink end status.
However, you cannot perform head
cleaning operation.
This error is detected if the ink consumption reaches
about 90%.
"-" : don't care High speed Blink : 0.1sec on + 0.1sec off repetition
Blink : 0.5sec on + 0.5sec off repetition Blink alternately 1 : 0.5sec on + 0.5sec off repetition
Blink 2 : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition Blink alternately 2 : 0.5sec on + 0.5sec on repetition
Table 3-1. Error Indications and Fault Occurrence Causes
Printer Condition
Indicators
EPSON Printer Window 3 Fault Occurrence Cause
Power Paper Ink 1-7
To Next Page
Loading...
