Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Routing FFC/cables 206
Confidential
MAIN BOARD (REAR SIDE OF THE CARTRIDGE BOX)
(ARTISAN 800/PX800FW/TX800FW)
Note * :See Fig. 4-245 for the connector positions on the Main Board.
Figure 4-251. Rear side of the Cartridge Box(Artisan 800/PX800FW/TX800FW)
MAIN BOARD (BEHIND CARTRIDGE BOX)
(ARTISAN 700/PX700W/TX700W)
Note * :See Fig. 4-247 for the connector positions on the Main Board.
Figure 4-252. Routing to the FFC Holder(Artisan 700/PX700W/TX700W)
No. FFC/cable name CN No.
*
Remarks
1 CR Encoder FFC CN6 Ferrite Core x2
2 Head FFC (x4) CN1,2,3,4 Ferrite Core x1
3 CSIC FFC CN5 ---
Ferrite core:
Put Head FFC (x4) and CR Encoder FFC through
this, and place it on the rear side of Cartridge Box
and secure it with double-sided tape.
CSIC FFC
Head FFC (x4):
Route them through the ribs (x4)
and ferrite core, and secure them
on the rear side of Cartridge Box
with double-sided tape.
CR Encoder FFC:
Route this through the ribs
(x4) and ferrite core.
Fold line
Rib
Double-sided tape
No. FFC/cable name CN No.
*
Remarks
1 Panel FFC CN33 Ferrite core (x1)
2 CR Encoder FFC CN6 ---
3 Head FFC (x4) CN1,2,3,4 ---
4 CSIC FFC CN5 ---
Head FFC (x4)
Panel FFC
CSIC FFC
CR Encoder FFC
Put Panel FFC only
through ferrite core.
Fold line
Rib
Double-sided tape
Spacer:
Attach it to Panel FFC with double-sided
tape, and secure it with the hooks (x3).
CR Encoder FFC & Head FFC (x4):
Route them through the ribs (x4),
and secure them with double-sided
tape (x2) behind the Cartridge Box.
Panel FFC:
Route it through the ribs
(x4), and ferrite core.
http://www.manuals4you.com
To Next Page
Loading...
