Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Routing FFC/cables 207
Confidential
ROUTING THROUGH THE FFC HOLDER
See Fig. 4-245 for the connector positions on the Main Board.
Figure 4-253. Routing to the FFC Holder
ROUTING AROUND THE PRINTER MECHANISM
Note * :See Fig. 4-245 for the connector positions on the Main Board.
Figure 4-254. Plunger Cable
(Continued to the next page.)
No. FFC/cable name CN No.
*
Remarks
1 CR Encoder FFC CN6 ---
2 Head FFC (x4) CN1,2,3,4 ---
Rib
Hole
Fold line
Insert the CR Encoder FFC and
Head FFC (x4) together to the rib
on the FFC Holder and the hole.
FFC Holder
Ink Supply Tube Assy
Cover Ink Supply Tube Assy with CR
Encoder FFC and Head FFC (x4), and
secure them to the FFC Holder.
No. FFC/cable name CN No.
*
Remarks
1 Plunger cable CN19 ---
Do not tuck
Acetate tape
Route this not to let it get
caught between Cartridge Slot
Assy and Cartridge Box.
Hook
Plunger cable:
Route this to the hooks (x10) and
secure it with acetate tape (x1).
http://www.manuals4you.com
To Next Page
Loading...
