Controlling a Networked Projector Using a Web Browser
73
a
If the default Web Control Password is set, a screen prompting to
change the password appears before you can view the Advanced
screen. Follow the on-screen instructions to change the password.
It is strongly recommended to change password regularly to prevent an
unauthorized access to your projector.
A
Opens the menus.
B
Displays the menu name you selected.
C
Specifies the projector settings. (The available settings vary depending on your
projector model.)
D
Locks/unlocks the projector settings.
E
Updates the projector settings.
a
You cannot change the following settings using Epson Web Control.
• HDMI Link
• Image Shift
• User's Logo
• HDMI EQ Setting
• Language
• Search Access Point
a
You can select the following settings only with Epson Web Control.
• Monitor Password (up to 16 alphanumeric characters)
• IPv6 Settings (manual)
• HTTP port (port number used for Web Control except for 80
[default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000,
10001, 41794)
To Next Page
Loading...
