Name Function
C
[Enter] button
[
]
x When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
x If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
D
[w][v] buttons
x If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.56
s "Using the Help" p.65
E
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.65
F
[Esc] button
x Stops the current function.
x If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu" p.56
G
[a][b] buttons
x Adjusts the speaker volume.
[b] Increases the volume.
[
a
] Decreases the volume.
s "Adjusting the Volume" p.37
x If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.56
s "Using the Help" p.65
H
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.56
I
[Screen Fit] button
Adjusts the image so that two images are superimposed
correctly. See the following manual when superimposing
images for the first time after installation.
s Startup Guide
Name Function
J
[Focus Help] button
This cannot be used while projecting in a stacked
configuration.
Part Names and Functions
14
To Next Page
Loading...
