Epson ELPFT01 User Manual

Installing the Touch Unit
121
f
Repeat step 5 until all of the dots disappear
When all of the dots disappear, touch calibration is complete.
c

If you touch the wrong position, press the [Esc] button on the remote control or control panel.
This returns you to the previous dot. You cannot go back by two dots.

To cancel touch calibration, hold down the [Esc] button for two seconds.

It may take several seconds after all of the dots have disappeared until touch calibration is
complete.

Epson ELPFT01 Specifications

General

Brand	Epson
Model	ELPFT01
Category	Projector
Language	English