Setting the Projector
128
Installing Multiple Projectors (Multi-
Projection)
You can create one horizontally long screen as a unified image projected from multiple projectors.
When performing multi-projection, make connections and the necessary settings in the following order.
c
When setting Multi-Projection, we recommend setting Operation > Sleep Mode to Off from the
projector’s Menu.
a
Connecting cables (s p.16)
b
Setting the Projector ID (s p.128)
c
Multi-Projection connection settings (s p.130)
d
HDMI Link settings (s p.133)
e
Multi-Projection image adjustment (s p.134)
When using interactive features in Multi-Projection, perform the following after making the settings above.
f
Projector Sync. Settings (s p.135)
g
EDID settings (s p.136)
h
Calibrate the Interactive Pen (s p.86)
i
Calibrating the touch operation position (s p.119)
Setting the Projector ID
a
Turn on the projector, and then press the [Menu] button
Using the Remote Control Using the Control Panel
To Next Page
Loading...
Need help?
General
