Using the Remote Control Panel Utility (EPL-6200 only) 269
7
7
7
7
7
7
7
7
7
7
7
7
ESCP2, FX, and I239X modes
The following dialog box appears when the emulation mode is
ESCP2, FX, or I239X:
Note:
Use Next and Prev to access all available setting options.
Condensed (ESCP2, FX only)
Allows you to change character spacing. Condensed printing is
useful for spreadsheets and other applications that need to fit a
large amount of information on each line. However, 15-cpi
(characters per inch) characters cannot be condensed.
T.Margin (ESCP2, FX only)
Allows you to specify the distance from the top of the sheet to the
baseline of the first printable line. This is measured in 0.05 inch
increments.
Text (ESCP2, FX only)
Allows you to set the page length in lines. The unit of measure for
this option is a 1/6 inch line.
To Next Page
Loading...
