354 Troubleshooting
Control panel: Ready and Error lights on
Indicates that there may be a paper jam inside the printer. Open
the printer’s output cover, remove any jammed paper, and close
the cover. The error will automatically clear itself and the jammed
page’s print data is reprinted.
Control panel: Ready and Error lights on
Indicates that there may be a paper jam inside the printer. Open
the printer’s front cover, remove any jammed paper, and close the
cover. The error will automatically clear itself and the jammed
page’s print data is reprinted.
Control panel: Ready and Error lights on
Indicates that there is either no paper loaded in the printer, or
there is a paper jam in the feed slot.
If no paper is loaded, load paper into the MP tray, then open and
close the printer’s front cover. See “Loading Paper” on page 15
for instructions on loading paper.
You can clear the error by pressing Continue on the EPSON
Status Monitor 3 window that appears.
Paper Jam
Paper Out/Feed Jam
To Next Page
Loading...
