82 Using the Printer Driver For Windows
Job Timeout
Specify the maximum number of seconds that can elapse for a
print job to get from the computer to the printer before the printer
stops trying to print the document. If you enter “0” (zero), the
printer will continue trying to print indefinitely.
Wait Timeout
Specify the maximum number of seconds that the printer will wait
to get more PostScript information from the computer before the
print job is automatically canceled. After the specified time
elapses, the printer will stop trying to print the document and
prints an error message instead. If you enter “0” (zero), the printer
will wait indefinitely. You may want to increase this value when
printing complicated documents.
Minimum Font Size to Download as Outline
Specify the minimum font size (in pixels) for which the printer
driver will download TrueType fonts as outline (Type 1) fonts. A
font smaller than the minimum setting will be downloaded as a
bitmap (Type 3/Type 32) font.
Maximum Font Size to Download as Bitmap
Specify the maximum font size (in pixels) for which the printer
driver will download TrueType fonts as bitmap (Type 3/Type 32)
fonts. A font larger than the maximum setting will be
downloaded as an outline (Type 1) font.
Installable Options
The settings available under Installable Options enable you to
specify whether certain options are installed into the printer, and
if so, what they are. The available settings are Installed Memory,
Lower Cassette Unit, and Duplex Unit.
To Next Page
Loading...
