24 Paper Handling
R4CC530
long.bk Rev. E
A5 size PAPER.fm
6/23/03
L
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
11. Make sure the paper guide is lying flat on the printer and slide
the edge guides to the middle of the paper guide.
Note:
For your safety, EPSON recommends operating the printer with the
printer cover closed. The printer will function with the printer cover
open or removed, but maximum safety and print speed are achieved
when the cover is closed.
12. Turn on the printer. When the printer receives data, it
automatically loads the paper and starts printing.
13. After you finish printing, follow the steps in “Removing
continuous paper” on page 47 to remove your printed
document.
If the first line on your page appears too high or low, you can
change its position by using the Micro Adjust function as
described in “Adjusting the top-of-form position” on page 64.
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
Removing the tractor from the front push position
Follow these steps to remove the tractor from the front push
position:
1. Make sure the printer is turned off.
2. Remove any paper from the tractor as described in
“Removing continuous paper” on page 47.
To Next Page
Loading...
