❏ Windows printer driver
Enable Quiet Mode on the Main tab.
❏ Mac OS printer driver
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print &
Fax), and then select the printer. Click Options & Supplies > Options (or Driver). Select On as the
Quiet Mode setting.
The Date and Time Are Incorrect
Error occurred in power supply.
Solutions
Aer a power failure caused by a lightning strike or if the power is le o for a long time, the clock may
show the wrong time. Set the date and the time correctly in Settings > General Settings > Basic Settings
> Date/Time Settings on the control panel.
The Root
Certicate
Needs to be Updated
The root certicate has expired.
Solutions
Run Web Cong, and then update the root certicate.
Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8
There is a problem with your AirPrint setup.
Solutions
Run Web
Cong
, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select
System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), remove
the printer, and then add the printer again.
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 254
A Message Prompting You to Reset the Ink Level is Displayed Even After Relling
the Ink
Ink level was not reset.
Solutions
Aer relling the ink, follow the on-screen instructions to reset the ink level.
& “Notes on Resetting the Ink Level” on page 198
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Operate the Printer as Expected
184