Control Panel 113
4
4
4
4
4
4
4
4
4
4
4
4
eTear Off/Bin (Set) button
❏ Feeds continuous paper forward to the tear-off
position.
❏ Feeds continuous paper backward from the tear-off
position to the top-of-form position.
❏ Selects a cut-sheet feeder bin when the cut-sheet
feeder is installed.
❏ When the printer enters the default setting mode, the
button works as the Set button. You can press the Set
button to select the next value of a setting menu.
Tear Off/Bin lights
❏ Both of the two lights flash when continuous paper is
in the tear-off position, and both of the lights are off
when continuous paper is not in the tear-off position.
❏ The left light is on when Card mode is selected.
❏ Both the lights are off when bin 1 of the optional
cut-sheet feeder is selected.
❏ The right light is on when bin 2 of the optional
cut-sheet feeder is selected.
To Next Page
Loading...
