Epson LQ-590 - Using an Additional Driver

Printer Software 87
3
3
3
3
3
3
3
3
3
3
3
3
Note:
❏ Do not use spaces or hyphens for the share name, or an error
may occur.
❏ When sharing the printer, be sure to set EPSON Status
Monitor 3 so that the shared printer can be monitored on the
printer server. See “Setting up EPSON Status Monitor 3” on
page 82.
You need to set the client computers so that they can use the
printer on a network. See the following pages for details.
❏ “With Windows Me, 98, or 95” on page 95
❏ “With Windows XP or 2000” on page 96
❏ “With Windows NT 4.0” on page 100
Using an additional driver
When the printer server’s OS is Windows XP, 2000, or Windows
NT 4.0, you can install the additional drivers in the server. The
additional drivers are for client computers that have different OS
from the server.
Follow these steps to set a Windows XP, 2000, or Windows NT
4.0 as a printer server, and install the additional drivers.
Note:
❏ You must access Windows XP, 2000, or Windows NT 4.0 as the
Administrators of the local machine.
❏ If the Printer server’s OS is Windows NT 4.0, the Additional driver
can be used only on Service Pack 4 or later.