Control Panel 117
4
4
4
4
4
4
4
4
4
4
4
4
3. Press the Pitch button until the Three Pitch lights indicate the
desired pitch as shown below.
O=On, N=Off
4. Make sure that the desired font and pitch are selected.
About Your Printer’s Default Settings
The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from
the printer’s control panel using the default-setting mode.
For a detailed description of the settings you can change in the
default-setting mode, see “Understanding default settings” on
page 118. For instructions on changing the settings, see
“Changing default settings” on page 124.
NNO 10 cpi
NON 12 cpi
NOO 15 cpi
ONN 17 cpi
ONO 20 cpi
OOO PS
To Next Page
Loading...
