230 Product Information
Australian model:
Cleaning the Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year.
Follow these steps to clean the printer:
1. Remove any paper loaded in the printer, and turn off the
printer.
2. Remove the paper guide. If an optional cut-sheet feeder is
installed, remove it.
3. Use a soft brush to carefully brush away all dust and dirt from
the outer case and paper guide.
4. If the outer case and the paper guide are still dirty or dusty,
clean them with a soft, clean cloth dampened with mild
detergent dissolved in water. Keep the printer cover and front
cover closed to prevent water from getting inside the printer.
EMC FCC part 15 subpart B class B
CSA C108.8 class B
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
EMC AS/NZS 3548 class B
To Next Page
Loading...
