14 Paper Handling
Note:
When the temperature is 5°C (41°F) or lower, or 35°C (95°F) or higher,
set the paper-thickness lever one position higher to improve print quality.
Loading Continuous Paper
Follow the instructions in this section to load continuous paper in
the printer.
Positioning the continuous paper supply
Before using continuous paper, make sure you line up your paper
supply with the tractor feeder as shown below, so that the paper
feeds smoothly into the printer.
Loading continuous paper with the tractor
The paper loading procedure depends on where you position the
tractor which feeds paper to the printer. Follow the instructions
below for your tractor position.
This section provides instructions on “Using the tractor in the
front push position” on page 15, “Using the tractor in the rear
push position” on page 23, “Using the tractor in the pull position”
on page 30, and “Using two tractors in a push/pull combination”
on page 42.
To Next Page
Loading...
