Options and Consumables 175
6
6
6
6
6
6
6
6
6
6
6
6
Cut-Sheet Feeder
Two types of optional cut-sheet feeders are available for use with
your printer as shown below:
You can use either one of these separately, or you can use both
feeders together as a double-bin cut-sheet feeder to automatically
load two different types of single-sheet paper.
The single-bin cut-sheet feeder holds up to 50 single sheets. The
high-capacity cut-sheet feeder holds up to 150 single sheets or up
to 25 envelopes.
c
Caution:
Do not load multipart forms, carbon paper, or labels in the
cut-sheet feeder.
To install the single-bin, high-capacity, or double-bin cut-sheet
feeder, see “Installing the cut-sheet feeder” on page 176.
However, you must assemble the double-bin cut-sheet feeder
before installing it. To load paper in a bin, see “Loading paper in
the single-bin cut-sheet feeder” on page 178, or “Loading paper
in the high-capacity cut-sheet feeder” on page 183.
Note:
You cannot install and use the optional cut-sheet feeders when the tractor
unit is installed in the pull position. See “Removing the tractor from the
pull position” on page 40 for instructions on removing the tractor from
the pull position.
Single-Bin Cut-Sheet Feeder: LQ-590:C80637✽
LQ-2090:C80639✽
High-Capacity Cut-Sheet Feeder: LQ-590:C80638✽
LQ-2090:C80640✽
To Next Page
Loading...
