114 Control Panel
f Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper if a sheet is loaded.
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backward to the standby
position if a sheet is loaded.
gMicro adjust
When you hold down the Pause button for three seconds,
the printer enters the micro adjust mode. In this mode,
you can press the LF/FF and Load/Eject buttons to adjust
the top of form or tear off position. See “Using the Micro
Adjust Function” on page 61.
hLF/FF button
❏ Feeds paper line by line when pressing shortly.
❏ Ejects a single sheet or advances continuous paper to
the next top-of-form position when held down.
iPause light
❏ On when the printer is paused.
❏ Flashes when the printer is in the Micro Adjust mode.
To Next Page
Loading...
