Epson LQ-590 - Printer Specifications; Mechanical

Product Information 211
A
A
A
A
A
A
A
A
A
A
A
A
Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: High speed draft 440 cps at 10 cpi
Draft 330 cps at 10 cpi
LQ 110 cps at 10 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-inch or programmable in 1/360-inch
increments
Printable columns:LQ-590:
80 columns (at 10 cpi)
LQ-2090:
136 columns (at 10 cpi)
Resolution: Maximum 360 × 180 dpi (letter quality)
Paper feed
methods:
Friction (front, rear)
Push tractor (front, rear)
Pull tractor (front, bottom, rear)
Push and pull tractor (additional tractor is
required) (front, rear)
Cut-sheet feeder (optional)
Roll paper holder (optional)
Paper feed speed: Continuous 127 mm/second
5 inches/second
Intermittent 45 msec/line at 1/6 inch
line spacing