Paper Handling 7
2
2
2
2
2
2
2
2
2
2
2
2
Chapter 2
Paper Handling
Selecting a Paper Source
Your printer provides a variety of paper sources for printing on
single sheets and continuous paper. Paper can be fed into the
printer from the top, front, bottom, or rear. Select the paper source
that best suits your current printing needs.
Printing on continuous paper
You can choose from three tractor positions (front push, rear push,
and pull) and three paper entry slots (front, rear, and bottom) for
continuous paper printing. This section helps you determine
which paper paths and tractor positions are best for your
continuous paper printing needs. See “Loading continuous paper
with the tractor” on page 14 for tractor installation and paper
loading instructions.
Using the push tractor positions
If you often need to tear off sheets of continuous paper (for
example, if you are printing purchase orders or sales slips), it is
best to use the tractor in the front or rear push position. This allows
you to use the printer’s tear-off edge to easily tear off sheets of
continuous paper at the perforation. Also, when continuous
paper is loaded on a push tractor, you can print on single sheets
of paper from the paper guide without removing the continuous
paper from the tractor.
To Next Page
Loading...
