Epson LQ-590 - Switching to Printing on Continuous Paper

60 Paper Handling
c
Caution:
Make sure you tear off your printed document before you
press the Load/Eject button in the next step. Reverse
feeding several pages at a time may cause a paper jam.
2. Press the Load/Eject button to feed the continuous paper
backward to the standby position. The paper is still attached
to the push tractor but is no longer in the paper path.
3. Move the paper guide to the upright position.
4. Set the paper release lever to the single-sheet position.
5. Load single sheets as described in “Loading Single Sheets” on
page 48.
Switching to printing on continuous paper
Follow these steps to switch from printing on single sheets to
printing on continuous paper with a push tractor: