Control Panel 125
4
4
4
4
4
4
4
4
4
4
4
4
The printer enters the default-setting mode and prints a
message prompting you to select the language for the
default-setting menu. The language which is underlined
indicates the current setting.
3. If the language you want is not selected, press the ItemD
(Font) button until the printout indicates the language you
want.
Note:
You cannot change the language by the ItemU (Pitch) button.
4. Press the Set (Tear Off/Bin) button to select the desired
language.
The printer prints a message asking if you wish to print all of
the current settings.
Note:
The language you select is also effective when you are entering the
lock-out setting mode or bidirectional adjustment mode.
5. If you want to print the current settings, press the Set button.
If you want to bypass printing of the current settings, press
the ItemD button or the ItemU button.
The printer prints the first menu and the current value of the
menu.
6. Press the ItemD button or the ItemU button to select the menu
parameters which you wish to change. Press the Set button
to scroll through the values within the selected parameter
until you find the desired setting. After setting the selected
parameter to the desired setting, you may either continue to
make changes to other parameters by pressing the ItemD
button or the ItemU button, or exit the default-setting mode
by pressing the Menu (Pitch and Tear Off/Bin) buttons.
To Next Page
Loading...
