Epson LX 300+II Reference Guide

32 Paper Handling
❏ To remove the labels from the printer, tear off the fresh
supply at the back of the printer; then press the LF/FF button
to advance the remaining labels out of the printer.
c
Caution:
Never feed labels backward through the printer; they can easily
peel off the backing sheet and jam the printer.
Envelopes
You can feed envelopes individually using the paper guide.
Keep the following tips in mind:
❏ Set the paper thickness lever to the proper position. See
page 29.
❏ To load an envelope, follow the steps on page 26 for printing
a single sheet. Insert the wide edge of the envelope into the
printer first, printable-side down. When you insert the
envelope between the edge guides, push it firmly and hold it
until it feeds into the printer.
❏ Use envelopes only under normal temperature and
humidity conditions.
❏ Make sure the printing stays entirely within the
recommended printable area.
❏ The print head must not go past the left or right edge of the
envelope or other thick paper. It’s a good idea to print a test
page using a normal single sheet of paper before you print
on envelopes.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)