Epson LX 300+II Reference Guide

Using the Control Panel 81
2. Hold down the Tear Off (Font) button and then turn on the
printer.
The printer enters Default Setting mode and prints
instructions for selecting the language. The current language
is indicated by which control panel lights are on. (For
English, only the Pause light is on.)
3. If you want a different language, press the
LF/FF button until
the lights show the language you want.
4. Press the
Tear Off (Font) button to print a list of all the
current settings.
5. If the settings are all correct, turn off the printer to exit
Default Setting mode.
If you want to change any settings, go to step 6.
6. Press the
Tear Off (Font) button. The printer prints
instructions for changing the settings.
7. Press the
LF/FF button to scroll through the options for the
selected setting until you see the one you want. Then press
the
Tear Off (Font) button to select the next setting you want
to change.
8. When you finish making settings, turn off the printer to exit
Default Setting mode.
Your new settings remain in effect until you change them again
or reset the printer’s defaults.
Restoring the printer’s default settings
If you want to restore all the factory default settings, turn off the
printer. Then hold down the
Load/Eject, LF/FF, and Pause
buttons while you turn on the printer.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)