Epson LX 300+II Reference Guide

92 Maintenance and Troubleshooting
Paper Handling
Single sheets do not feed properly
Cause What to do
The printer’s page length
setting may not match the
size of the continuous
paper you are using.
Check the Page length for tractor setting
in Default Setting mode. See page 68.
Regular gaps occur in the printout.
Cause What to do
One-inch skip-over-
perforation may be set.
Set skip-over-perforation to Off in
Default Setting mode. See page 67.
Paper does not feed.
Cause What to do
Continuous paper may be
left in the printer.
Remove the continuous paper. Set the
paper release lever to the single-sheet
position. Insert a new sheet.
The paper on the paper
guide is positioned too far
to the left or right for the
printer to detect it.
Move the paper (and the edge guides) a
little to the left or right.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)