Epson LX 300+II Reference Guide

26 Paper Handling
5. After you set the tear-off position, press the Pause button to
exit Micro Adjust mode.
6. Tear off the printed pages.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and begins printing.
Note:
Your tear-off position setting remains in effect until you change it,
even if you turn off the printer. (If you want to restore the printer’s
default tear-off position, you can reset the printer. See page 73 for
instructions.)
Printing on Single Sheets
You can load single sheets of paper one at a time using the
printer’s paper guide.
Before printing on single-sheet multipart forms, envelopes, or
other special paper, make sure the paper thickness lever is set to
the correct position. See “Printing on Special Paper” on page 29.
Note:
❏ Load only one sheet at a time.
❏ To load a stack of single-sheet paper, use the optional cut-sheet
feeder. (See page 98 for more information.)
❏ For detailed specifications on the types of single-sheet paper you
can use, see page 115.
❏ You can use the paper guide to load single-sheet carbonless
multipart forms that are fastened at the top by line gluing.
❏ Insert multipart forms in the paper guide, bound edge first and
printable side down.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)