Epson LX 300+II Reference Guide

72 Using the Control Panel
2 Tear Off (Font) button
❏ Advances continuous paper to the tear-off position.
❏ Feeds continuous paper backward from the tear-off
position to the top-of-form position.
❏ In Micro Adjust mode, selects one of the six built-in fonts.
3 LF/FF button
❏ Feeds paper line by line when pressed and released.
❏ Ejects a single sheet or advances continuous paper to the
next top-of-form position when held down.
❏ In Micro Adjust mode, adjusts the top-of-form and tear-
off position.
4 Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper.
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backward to the standby
position.
❏ In Micro Adjust mode, adjust the top-of-form and tear-off
position.
5 Pause button
Stops printing temporarily, and resumes printing when
pressed again. When held down for three seconds, turns on
Micro Adjust mode. To turn it off, press it again.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)