Epson LX 300+II Reference Guide

Maintenance and Troubleshooting 89
The Paper Out and Pause lights are on and the printer beeps
three times.
Cause What to do
No paper is loaded. Load paper in the printer.
The printer sounds like it is printing, but nothing is printed.
Cause What to do
The ribbon cartridge may
not be installed properly
or the ribbon may be worn
out.
See “Replacing the Ribbon Cartridge” on
page 105.
The printer makes a strange noise, beeps five times, and stops
printing abruptly.
Cause What to do
The paper or ribbon may
be jammed.
Turn off the printer and check for a paper
jam or a ribbon jam.
The printer may have
overheated.
Let the printer cool. Then try to print
again. If it still does not print correctly,
see “Where To Get Help” on page 104.
The printer beeps five times and all the lights flash.
Cause What to do
An error has occurred. Turn off the printer and turn it on again.
If the problem persists, check for a paper
jam or ribbon jam. (If an error occurs
when you switch between single sheets
and continuous paper, make sure the
paper release lever is set correctly.)

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)