SC-S30600 Series Revision B
PRODUCT DESCRIPTION Control Panel 25
Confidential
Media Setup
Customize
Settings
1 to 30 (Media
setting bank)
Head Movement
Data Width Choose the range in which the print head moves during printing.
[Data Width] restricts print head movement to the printed area. Restricting the
extent of print head movement increases print speed.
If [Data Width] is selected, the print head will move the full width of the
largest media supported by the printer. Select this option for more even print
results with less variation.
Printer Full Width
Multi-Strike
Printing
Off
Choose the number of times each line is printed.
2 to 8
Roll Type
Printable Side Out
Choose [Printable Side Out] or [Printable Side In] according to how the media
is rolled.
Printable Side In
Tension
Measurement
Periodically Choose [Periodically] or [Every page] to have the printer automatically
monitor and adjust media tension during printing for optimal results, [Off] to
disable automatic tension adjustment. [Periodically] is recommended in most
circumstances. The printer may however be unable to adjust tension
appropriately for some media, resulting in excessive slack or other
maladjustments that cause printing problems, in which case you should select
[Off]. Note, however, that [Off] may result in unusually large margin between
pages. In addition, printing may not stop and the inside of the printer may
become stained. Observe the following precautions:
Do not print at the end of a roll
Do not select [Off] for [Media End Check].
Select [Every page] for more precise tensioning, but note that print times will
increase.
Every Page
Off
Media Tension 0 to 40
Increase tension if creases appear in the media during printing. The higher the
value, the greater the tension.
Feed Speed 1 to 2
Choose a slower feed speed if thin media is creased or torn or sticks together
during printing. The lower the value, the slower the speed.
Print Media List Print Prints all the contents set in the Media Setup Numbers 1 to 30.
Menu Menu Item/Setting Values (shaded one is the default) Explanation
To Next Page
Loading...
Need help?
General