What to do if my Epson Stylus C110 fails to feed paper but performs a paper ejection?
If your Epson Printer attempts to eject paper but fails to feed it, try these steps: * First, ensure the PE Sensor Connector Cable is securely connected to CN3 on the Main Board. * If the issue continues, replace the ASF Unit with a new one. You may need to try this more than once.
Print Quality| maximum resolution | 5760 X 1440 dpi |
|---|---|
| minimum ink droplet volume | 3 pl |
Print Speed| black text memo (A4) | Approx. 37 ppm (Draft) / 25 ppm (Default) |
|---|---|
| colour text memo (A4) | Approx. 20 ppm (Draft) / 11 ppm (Default) |
| photo (4R/4x6”) | Approx. 35 sec per photo (Draft W/Border) |
Ink Cartridges| black ink cartridge (T0731H) | 2 cartridges 740 pages |
|---|---|
| black ink cartridge (T0731) | 2 cartridges 470 pages |
| magenta ink cartridge (T0733) | 350 pages (Composite Yield) |
Paper Handling| paper feed method | Friction Feed |
|---|---|
| paper hold capacity | 120 sheets, A4 Plain paper |
| maximum paper thickness | 0.33 mm |
Electrical Specifications| rated voltage | AC 220-240V |
|---|---|
| rated frequency | 50~60 Hz |
| power consumption | Approx. 15W (per ISO10561 Letter Pattern) |
Weight and Dimensions| weight | 3.9 kg |
|---|---|
| height | 161 mm |
| width | 240 mm |
| depth | 435 mm |
To Next Page
