Epson Stylus C110 - Cover Printer; Upper Housing;Cover Open Sensor

EPSON Stylus C110/C120/D120 Revision B
DISASSEMBLY/ASSEMBLY Removing Housing 74
4.3.3 Cover Printer
 Part/Unit that should be removed before removing Cover Printer
None
 Removal Procedure
1. Release the guide pins (x2) that secure the Cover Printer and remove it from Upper
Housing.
Figure 4-4. Removing Cover Printer
4.3.4 Upper Housing/Cover Open Sensor
 Part/Unit that should be removed before removing Upper Housing/Cover
Open Sensor
None
 Removal Procedure
1. Open the Paper Support Assy.
2. Open the Stacker Assy.
3. Remove the Right Front Cover.
Figure 4-5. Removing Right Front Cover
Cover Printer
Guide pin
C H E C K
P O I N T
Stress whitening easily occurs in the hooks of the Right Front
Cover. Be careful not to apply too much force on the hooks when
removing the Right Front Cover. To remove the cover easily, use
the Upper Case Opener (code:1108202).
Right Front Cover
Hook