Epson Stylus C110 - Required Adjustments

EPSON Stylus C110/C120/D120 Revision B
ADJUSTMENT Adjustment Items and Overview 110
5.1.2 Required Adjustments
The table below lists the required adjustments depending upon the parts being repaired or replaced. Find the part(s) you removed or replaced, and check which adjustment(s) must be
carried out.
Table 5-4. Required Adjustment List
Priority
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
EEPROM data copy
Initial setting
USB ID input
Waste ink pad counter
Ink charge
Head ID input
Top margin adjustment
First dot position adjustment
Head angular adjustment
Bi-D adjustment
Initialize
PF deterioration offset/
Disenable PF
deterioration offset
CR motor heat
protection control
PF motor heat
protection control
PF adjustment
PF band adjustment
Main board unit
Remove
--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Replace
(Read OK)
O --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Replace
(Read NG)
--- O O
O
Replace
the pad
--- O O O O O
O
Input max.
value (10000)
O O O O
Printhead
Remove
--- --- --- --- --- --- O O O O --- --- --- O O
Replace
--- --- --- --- O O O O O O --- --- --- O O
Power Supply unit
Remove
--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- --- --- --- O O --- ---
Hopper
Remove
--- --- --- --- --- --- O O --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- O O --- --- --- --- --- --- ---
CR motor
Remove
--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- --- --- --- O --- --- ---
EJ roller
Remove
--- --- --- --- --- --- --- --- --- O --- --- --- O O
Replace
--- --- --- --- --- --- --- --- --- O --- --- --- O O
PF motor
Remove
--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- --- --- --- --- O --- ---
Main frame
Remove
--- --- --- --- --- --- --- --- O O --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- O O --- O --- --- ---
Adjustment Item
Part Name