Epson Stylus C110 - Page 94

EPSON Stylus C110/C120/D120 Revision B
DISASSEMBLY/ASSEMBLY Disassembling Printer Mechanism 94
 Be sure to install the CR Motor so that the groove on it faces
downward.
Figure 4-55. Installing CR Motor
 Tighten the screws in the order given in Figure 4-54.
 Make sure that there is no gap between the CR Motor and the
Main Frame.
A D J U S T M E N T
R E Q U I R E D
After replacing the CR Motor, be sure to perform the required
adjustment. See
Chapter 5 “ ADJUSTMENT” (p.107)
CR Motor
Groove