Epson Stylus DX4850 Service Manual

EPSON Stylus CX4100/CX4200/CX4700/CX4800/DX4200/DX4800/DX4850 Revision A
PRODUCT DESCRIPTION Control Panel 49
1.6.3 Operations
1.6.3.1 Stand-alone Copy / Memory Card Print
The functions of this unit caused by each button in stand-alone copy mode or memory card print mode are described in the following table.
Table 1-48. Operations
Button
Function
Stand-alone Copy Memory Card Print (Only for CX4700/CX4800/DX4800/DX4850)
Power Button • Turn on or off this unit.
Ink Button
• Start or advance ink cartridge (I/C) exchanging procedure.
 Case
 [All inks are enough.] Move carriage (CR) to I/C exchange position.
 [Ink low, Ink out, Without I/C error] Move CR to each color's ink check position if that color's I/C is ink low or ink out or without I/C. CR moves in the order of Cyan, Magenta, Yellow,
Black.
 [CR is in some color's ink check position.] Move CR to next color's ink check position or I/C exchange position.
 [CR is in I/C exchange position.] Move CR to standby position.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for ink out error, paper out error, memory card error, index sheet error, PG error.
Ink Button
(Holding over 3
sec.)
• Start cleaning head procedure.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for paper out error, memory card error, index sheet error, PG error.
Memory Card
Button
(Only for CX4700/
CX4800/DX4800/
DX4850)
• Make transition from “Stand-alone copy” mode to “Memory card print” mode and select and
light “Print Index Sheet”, or “Print All / DPOF” if DPOF file exists in the card.
• Turn off both 7-seg. LED and “Fit to Page” LED.
• Select “Plain Paper” and “Letter (or A4)”
• Change to next “Memory card print” function.
 Case
 [Print Index Sheet] Change to “Print From Index Sheet”, and change paper type and
paper size to the one last set in “Print From Index Sheet” or “Print
All / DPOF”.
 [Print From Index Sheet] Change to “Print All / DPOF”.
 [Print All / DPOF] Change to “Print Index Sheet”, and change paper type and paper
size to “Plain Paper” and “Letter (or A4)”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for memory card error, index sheet error, PG error.
Copy Button
• Set number of copies incrementally and indicate it on 7-seg. LED.
 Case
 [1 to 8] Add 1 and the number becomes 2 to 9.
 [9] Indicate “-”, which means 100 copies.
 [-] Reset to “1”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or
in error status.
• Number decreases one by one after 1 copy is finished and return to the beginning number when
all copies are finished. When “-” is indicated, number of copies decreases internally but no
change can be seen on 7-seg. LED.
• Make transition from “Memory card print” mode to “Stand-alone copy” mode and set number of
copies to “1”.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or
in error status except for memory card error, index sheet error, PG error.

Epson Stylus DX4850 Specifications

General

Brand	Epson
Model	Stylus DX4850
Category	Printer
Language	English